IRINFO Banner Image  

 


Content and accuracy of posted articles relating to infrared thermography are the responsibility of the individual authors.

Articles and their contents listed on this page or found at irinfo.org are not necessarily recommended nor endorsed by irinfo.org.

Please complete the information below to submit an article to be considered for publication at irinfo.org. Please keep in mind that:

  • the article must be ORIGINAL work
  • you must certify that YOU are the author
  • the article must not have appeared elsewhere
  • articles submitted are subject to editorial approval prior to being posted at irinfo.org
  • graphics may be submitted for inclusion with your article and are subject to editorial approval

 

Available Articles

     
Title Author PDF
     
Infrared Thermography for Expert Witness and Legal Documentation R. James Seffrin and Christopher J. Seffrin  
Defining the Elements for Successful Infrared Thermography R. James Seffrin  
Infrared Thermography Advances Aid Proactive Maintenance R. James Seffrin  
Infrared Thermography as a Proactive Tool for Roof Maintenance Christopher J. Seffrin  
NFPA 70E and Infrared Inspections of Electrical Distribution Systems
R. James Seffrin  
Non-Destructive Inspection of Steam Traps R. James Seffrin  
OSHA and Infrared Inspections of Electrical Distribution Systems R. James Seffrin  
Applying FEA to Perform Heat Transfer Calculations to Increase the Utility of IR Thermography Jack M. Kleinfeld, P.E.  
September 11, 2001: A Thermographer's Experience at Ground Zero Carol Ciemiengo
Applying Distance to Spot Ratio Values to Infrared Imagers for Accurate Temperature Measurement Warren C. Garber & R. James Seffrin  
The Fine Print: Contract Terms to Watch For and Avoid Robert J. Incollingo, Esq.
Confidence Limits in Temperature Measurements G. Raymond Peacock, Temperatures.com, Inc.
Thermal Imaging for Detetcing Potential SARS Infection R. James Seffrin
Infrared Thermography to Detect  Refractory Damage in a Fluid Catalytic Cracking Unit Robert K. Weigle
The Use of Infrared Thermography for Steel Process Development & Monitoring Kenneth J. Roush
Selecting, Specifying,and Purchasing Infrared Imagers R. James Seffrin
"What Else Can I Inspect"

John F. Keane and Robert P. Madding,
FLIR Systems, Inc.

Ultrasonic Tips On Monitoring Bearings For Proper Lubrication and Wear Mark A. Goodman, UE Systems, Inc.
Are you IR Challenged? Gregory R. Stockton,
Stockton Infrared Thermographic Services, Inc.
Infrared Inspection Data: What’s Hot and What's Not?

Scott Cawlfield, Logos Computer Solutions, Inc.
Liability:Where Does It Come From And Where Does It End? Robert J. Incollingo, Esq.
Applications of Infrared Thermography for Petrochemical Process Heaters Robert K. Weigle
Advances in Applications and Methodology for Aerial Infrared Thermography Gregory R. Stockton,
AITscan (Aerial Infrared Thermographers)
A division of
Stockton Infrared Thermographic Services, Inc.
Electricity Conservation Technology–A Revolutionary Way to Save Electricity, Money and Reduce Pollution Paul Grover, Kilawatt™ Partners
Infrared Thermography In The Marine Industry Skip Handlin, Vice President
Handlin Preventive Maintenance Services, Inc.

Quick Guide: Windows Mobile Software and Pocket PC’s - How PDAs save companies millions – and how they can work for you by Focusing on Data Augmentation,not just Office Automation

 

Fred Colbert, President
Colbert Infrared Services, Inc.

IR Thermography as a Tool for the Pest Management Professional Jon L. Grossman, Hi-Tech Inspection Services, Inc.
The 8 Discipline Approach to Problem Solving

Bill Arnott, Owner,Apex Infrared

Automation Tips and Techniquesf for GrowingYour Infrared Program Scott Cawlfield, Logos Computer Solutions, Inc.
Simplified Calibration of Radiometric Equipment Michael R. Sharlon, President
ACS Calibrations
Temperature Measurement of Plastic Injection Molding Dies

James M. Lies,
President
Infrared Predictive Maintenance

Using Sound Imaging to Enhance Your Diagnosis

Mark A. Goodman, VP Engineering, UE Systems, Inc.

Images and Reports: Your Work Product and the Law Robert J. Incollingo, Esq.
Infrared Inspection of Underground Fluid Lines Robert K. Weigle, Thermographer, Jersey Infrared Consultants
Playing Hide and Seek with Mold
How an Infrared Thermographer and a Mold Inspector Can Partner in Their Search for Mold

Gregory R. Stockton, Stockton Infrared Thermographic Services, Inc.

Rachelle Dobbs,Dobbs Enterprises, Inc.

Advanced Techniques in IR Thermography as a Tool for the Pest Management Professional

Jon L. Grossman, Hi-Tech Inspection Services, Inc.
Infrared Thermography for Stationary Marine Applications Skip Handlin, Vice President
Handlin Preventive Maintenance Services, Inc.
Common Misconceptions Relating to Infrared Inspection Ports Martin Robinson, Managing Director
Global Maintenance Technologies
Thermographic Documentation of Roof and Building Damage Incurred During the 2004 Florida Hurricane Season James Brady,
President, Level-III Certified Thermographer
&
Warren C. Garber,
Level-III Certified Thermographer
Implementation of IR Services in Developing a Sustainable Roof System Program David Seymore, President
David Seymore Contractor Inc.
Buried in Paperwork? Time, Tools, and Trends in the Infrared Industry Scott Cawlfield, Logos Computer Solutions, Inc.
Calibration and R&R Practices for Reliable Temperature Measurements G. Raymond Peacock, Temperatures.com, Inc.
Successful Use of IR in Pest Management Bart Bruni,
Certified Pest Operator
Bestec Exterminators
Semi Conductor Thermography
Bruce Williams, Intel Corporation

The Fundamentals of Refractory Inspection with Infrared Thermography

Sonny James,
Managing Director Thermal Diagnostics Ltd

Applying Infrared Imaging Techniques to Marine Surveying John (Jack) N. Allinson, II BS,
J.N. Allinson Associates, Inc.
Understanding Proprietary Infrared Image Files Fred Colbert, President
Colbert Infrared Services, Inc.
Where Has All the “Tribal Knowledge” Gone?

Mark A. Goodman, VP Engineering, UE Systems, Inc.

Trestles Anyone? A Thermographic Nightmare Jon L. Grossman, Hi-Tech Inspection Services, Inc.
A Thermographer’s Guide to Infrared Windows Martin Robinson, Managing Director
Global Maintenance Technologies
Corona and Tracking Conditions in Metal-clad Switchgear Case Studies James Brady,
President, Level-III Certified Thermographer,
Brady Infrared Inspections, Inc.
Infrared Applications in Building Diagnostics Ron Lucier,
ITC Training Center
FLIR Systems, Inc.
Infrared “Knowledge Management” Scott Cawlfield, Logos Computer Solutions, Inc.
Web Marketing for Small Business G. Raymond Peacock, Temperatures.com, Inc.
The Business of Infrared Home Inspections Bart Bruni,
Certified Pest Operator
Bestec Exterminators
An Infrared View of Inductive Heating Michael R. Sharlon, President
Thermasearch, Inc.
Destructive Harmonics in the Infrared World Skip Hadlin,
S. Handlin Predictive Maintenance, LLC
Thermal Infrared vs. Active Infrared:
A New Technology Begins to be Commercialized

Jon L. Grossman, Hi-Tech Inspection Services, Inc.
Infrared Inspection Windows: Where Do I Start? Martin Robinson, Managing Director
Global Maintenance Technologies
Methods of Inspection to Determine the Presence of Potential Arc Flash Incidents Mark A. Goodman, VP Engineering, UE Systems, Inc.
Interpreting the Images: Data Errors in Thermography – Electrical & Roofs

Harley Denio, President
Oregon Infrared

The Role of Infrared Testing at Data Centers Eric Stockton, Director
CompuScanIR™ Division,
Stockton Infrared Thermographic Services, Inc.
Using Infrared Thermography to Aid
in Indoor Air Quality Inspection & Mold Remediation

Lance Eisen,
Chief of Operations & Douglas Hoffman,
Executive Director, NORMI, Inc.

Fault Zone Analysis: Six Part Series on Identifying Motor Defects Noah P. Bethel
PdMA Corporation
The Importance of Spatial Resolution in Infrared Thermography Temperature Measurement –
Three Brief Case Studies
Authors: Robert P. Madding, Gary L. Orlove, Bernard R. Lyon
Infrared Training Center,
FLIR Systems, Inc.
Verifying an Infrared Imager's Calibration G. Raymond Peacock, Temperatures.com, Inc.
Using Infrared Sightglasses to Protect Against Arc-Flash Exposure

Antony J. Holliday,
Hawk IR International, Ltd.

Active Thermography: An Overview of Methods and Their Applications in Use Today Michael R. Sharlon, President
Thermasearch, Inc.
Inspection of Steam Reformers and Catalyst Tubes with Infrared Thermography Sonny James,
Managing Director Thermal Diagnostics Ltd
Thermographic Inspection of Building and Roof Water Intrusion in the State of Florida James Brady,
President, Level-III Certified Thermographer,
Brady Infrared Inspections, Inc.
What to Look for First, When Performing
Infrared Building Surveys

Gregory R. Stockton,
Stockton Infrared Thermographic Services, Inc.

Diagnosis and Repair of Failing In-floor
Electric Radiant Heating Lines
Lee Durston,
Forensic Building Scientist,
BCRA
Case Study of a Hotel Missing Insulation

Tom Mayfield, CIRT, CIAQT,
Mayfield Thermography Consulting Services, Inc.

Infrared and the Information Age Scott Cawlfield, Logos Computer Solutions, Inc.
See What You’ve Been Missing:
How IR Windows Can Help Prevent Arc Flash and Assist with NFPA 70E Compliance
Martin Robinson, President and
Tim Rohrer, Director of Sales
IRISS, Inc.
Bridging the Gap: Communicating Motor Reliability to Management Noah P. Bethel
PdMA Corporation
How a Fenestration Professional in New England Benefits from Use of Infrared Thermal Imaging of Doors & Windows Jay Ray,
founding member of IFSPA; and, R. Olsen
The Internet for Thermographers G. Raymond Peacock, Temperatures.com, Inc.
How Large Facilities, Industrial Complexes, Campuses, Military Bases and Cities Benefit from Wide-Area Thermal Mapping Gregory R. Stockton,
Stockton Infrared Thermographic Services, Inc.
Going Green: Tracking Down the “Greenhouse Gas” SF6 with Infrared Thermography Robert G. Benson
FLIR Systems, Inc.
Common Thermography Uses and Applications within the Petrochemical, Offshore Oil and Gas, Chemical, and Power Generation Industries Sonny James,
Managing Director Thermal Diagnostics Ltd
Fixed Thermal Imaging Camera Systems
for Process Measurement & Control
Scott J. Nagle,
Process Sensors Corporation
Infrared Inspection of Electric Utility Equipment: Documenting Common and Not-So-Common Thermal Exceptions James Brady,
President, Level-III Certified Thermographer,
Brady Infrared Inspections, Inc.
Design, Construction, and Testing of the Commercial Air Barrier Lee Durston,
Forensic Building Scientist,
BCRA
Underground Leak Detection:
An Opportunity for Technology Integration
Mark A. Goodman, VP Engineering, UE Systems, Inc.
Your PdM Programs: How to Optimize their Effectiveness Scott Cawlfield, Logos Computer Solutions, Inc.
Infrared Windows and Arc Ratings:
Dispelling the Myth of “Arc-Resistant IR Windows”
Martin Robinson, President and
Tim Rohrer, Director of Sales
IRISS, Inc.
World-Class Companies Need
World-Class Motor Management & Maintenance
Noah P. Bethel
PdMA Corporation
Techniques for Finding & Documenting
Moisture Intrusion in Buildings with an Infrared Imager

R. W. Olsen
Ray Olsen and Son, Inc.

&

Gregory R. Stockton,
Stockton Infrared Thermographic Services, Inc.

Delta T Alert: Wireless Temperature Monitoring of Electrical Enclosures Fred Baier, East Coast Industries, Inc.
Infrared Data as Evidence for Expert Witness Testimony Bart Bruni, Bestec Home Inspections
The Importance of Spatial Resolution in Infrared Thermography Temperature Measurement – Three Brief Case Studies Dr. Robert Madding, FLIR Systems, Inc.
How and Why I Got Into Medical Thermography Sonny James,
Managing Director Thermal Diagnostics Ltd
Horses In Color: The Role of Thermal Imaging in the Equine Industry Joanna L. Robson,
DVM, CVSMT, CMP, CVA, SFT
Inspiritus Equine, Inc.
A Phased Approach for Large Building Infrared Inspections: A Case Study James Brady,
President, Level-III Certified Thermographer,
Brady Infrared Inspections, Inc.
Add more Flav-IRs…
Expand your Business and Expand your Opportunities!

Peter Hopkins

&

Gregory R. Stockton,
Stockton Infrared Thermographic Services, Inc.

“It’s an IR World After All”: The Creation of an Infrared Program at Walt Disney World Resorts and Parks Robert Owens,
Walt Disney World Parks and Resorts
Using IR Thermography as a Predictive Maintenance Tool in an Electronics Manufacturing Facility Michael R. Montgomery,
Delphi Electronics & Safety
Paper Mill Saves Budget Dollars with IR Window Program ROI Case Study 1 Martin Robinson, President and
Tim Rohrer, Director of Sales
IRISS, Inc.
Motor Efficiency and Fault Zone Analysis Noah P. Bethel
PdMA Corporation

 

 
   
Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software.
   

 

Legal Disclaimer Site Map