Ladder Safety - Part 2
Sponsored by:
Ladder Safety – Part 2
Tip written by: Infraspection Institute
For many thermographers, ladders provide a means for accessing remote areas and equipment. In this week’s Tip we cover safety tips applicable to extension ladders.
According to OSHA, falls from ladders are one of the leading causes of occupational fatalities and injuries. When using portable extension ladders, always keep the following in mind:
- Avoid electrical hazards. Look for overhead power lines before handling a ladder.
- Inspect ladders before each use. Remove broken ladders from service and repair or discard. Use a ladder only on a stable, level surface. Do not stack ladders on boxes, barrels, or unstable platforms to gain additional height.
- Extension or straight ladders used to access an elevated surface must extend at least 3 feet above the point of support. Never stand on rungs above the point of support.
- The proper angle for setting up a ladder is to place its base one quarter of the working length of the ladder from the wall or other vertical surface.
- Be certain that all locks on an extension ladder are properly engaged.
- Do not exceed ladder load rating. Do not move or shift a ladder while a person or equipment is on the ladder.
Lastly, a ladder placed in any location where it could be displaced by other work activities must be secured to prevent displacement or a barricade erected to keep traffic away from the ladder.
Thermographer safety is one of the many topics covered in all Infraspection Institute Certified Infrared Thermographer® training courses. For information on thermographer training and certification, visit us online at www.infraspection.com or call us at 609-239-4788.
