Skip to main content

Tip of the Week Archive

Spring is the Time for IR Roof Inspection

June 09, 2003

Sponsored by:

II_logo
Spring is the Time for IR Roof Inspection

With onset of warmer weather, the harshness of winter is but a fading memory for most. Left undetected, the damage caused by winter’s fury is a reality that can lead to premature roof failure. Fortunately, an infrared inspection of your roof can detect evidence of problems before they can get out of hand.

Performed under the proper conditions with the right equipment, an infrared inspection can detect evidence of latent moisture within the roofing system often before leaks become evident in the building.

The best candidates for infrared inspection are flat or low slope roofs where the insulation is located between the roof deck and the membrane and is in direct contact with the underside of the membrane. Applicable constructions are roofs with either smooth or gravel-surfaced, built-up or single-ply membranes. If gravel is present, it should be less than ½” in diameter and less than 1” thick.

For smooth-surfaced roofs, a short wave (2-5.6 µ) imager will provide more accurate results especially if the roof is painted with a reflective coating. All infrared data should be verified by a qualified roofing professional via core sampling or invasive moisture meter readings.

Advertisement

Latest Tips

Heat Stress and the Human Body

June 30, 2025

The Value of Level III Certification

June 23, 2025

Easier Than A, B, C

June 16, 2025

IR Imaging for Checking Tank Levels

June 09, 2025

Wind as an Error Source

June 02, 2025